RaceQuip Pro25 Helmet SA2025

The RaceQuip PRO25 isn’t just SA2025 certified, it’s purpose-built for the racers who tighten their belts with one hand and flip the ignition switch with the other. This is the helmet you grab whether you’re staring down the Christmas tree or launching away from the green flag, whether your tires are picking up clay or laying down rubber.

Under that slick aero profile, the PRO25 packs serious protection: a hand-laid FRP composite shell, energy-absorbing EPS liner, and fire-retardant Nomex® interior. The wide eye port keeps your field of vision clear – with space left over for your glasses – and the distortion-free 3mm polycarbonate shield features tear-off posts and a silicone gasket to seal out dust and dirt. While the integrated duckbill chin-spoiler keeps things planted at speed, venting up top and out the back helps keep your head cool when your race (and the weather) heats up. Anodized aluminum pivot hardware, 8-position hand ratcheting tear-off posts, and M6-threaded HANS/FHR inserts are standard because cutting corners on your Safety isn’t. The PRO25 delivers pro-level safety for racers who build it, haul it, and race it themselves.

NOTE: This helmet is Snell SA2025-certified and is broadly accepted by race organizing bodies and tracks through 2035. Always verify safety rules with your sanctioning body.

• Certified for all Racing Series accepting Full-Face Snell SA2025 Helmets
• Ideal for Autocross, HPDE, Short-Track, Drag Racing, and Club Racing
• Aero Shell Design with Integrated Chin Spoiler
• Wide Eyeport Allows for Improved Visibility and Eyewear Use
• Silicone Eyeport Gasket Seals Out Dust and Dirt
• Top and Rear Exhaust Vents Improve Airflow and Driver Comfort
• Fire-Retardant Paint, Liner, and Chin Strap
• FRP Composite Shell: Lightweight, Hand-Laid Strength
• EPS Liner for Maximum Impact Energy Absorption
• Comfort Fit Blended Nomex® Fire-Retardant Interior
• Kevlar® Chin Strap with Double D-Ring Retention System
• Reinforced M6 Inserts for HANS / Head-and-Neck Restraint Compatibility
• Anodized Aluminum Pivot Kit with Friction-Adjust Locking Mechanism
• Tear-Off Posts with 8-Position Hand Ratcheting System
• Distortion-Free 3mm Polycarbonate Low Fog Shield
• Available in Flat Black, Gloss Black and Gloss White
• Sizes 2X-Small to 3X-Large (Youth-Sized PRO-series Models also available)
• Snell SA2025 certified

Helmet, Pro25, Full Face, Snell SA2025, Head and Neck Support Ready, Colors: Black, Flat Black, White

* Youth SFI Helmets have a smaller, lighter shell and are designed for lower speed youth racing.

Measuring Fit:

Measure with a cloth tape around the head about 1" above eyebrows. A snug fit is optimum. Use size in CM for best accuracy and go with the largest measurement you get. Hat sizes are only a guideline and not the most accurate. Inches are rounded to nearest 1/16. If you are between sizes you must go with the larger size. Add 1 to 1.5cm for a head sock.

When fitting a helmet, be sure to tighten chin strap before evaluating fit.

Available Sizes/Colors:

The RaceQuip PRO25 Helmet is available in the following sizes:

• 277000RQP (2XS, Gloss Black)
• 277001RQP (XS, Gloss Black)
• 277002RQP (Small, Gloss Black)
• 277003RQP (Medium, Gloss Black)
• 277005RQP (Large, Gloss Black)
• 277006RQP (XL, Gloss Black)
• 277007RQP (2XL, Gloss Black)
• 277008RQP (3XL, Gloss Black)
• 277110RQP (2XS, Gloss White)
• 277111RQP (XS, Gloss White)
• 277112RQP (Small, Gloss White)
• 277113RQP (Medium, Gloss White)
• 277115RQP (Large, Gloss White)
• 277116RQP (XL, Gloss White)
• 277117RQP (2XL, Gloss White)
• 277118RQP (3XL, Gloss White)
• 277991RQP (XS, Flat Black)
• 277992RQP (Small, Flat Black)
• 277993RQP (Medium, Flat Black)
• 277995RQP (Large, Flat Black)
• 277996RQP (XL, Flat Black)
• 277997RQP (2XL, Flat Black)