PJ1 Fast Black Exhaust System Paint

Provides a Protective Shield against Rust and Corrosion

PJ1 Fast Black Exhaust Paint forms a protective shield against rust and corrosion. It was originally formulated for NASA for use on re-entry spacecraft. As a silica-ceramic hybrid, it moves with the metal as it heats/expands and cools/contracts to give it durability.

• Forms a protective shield against rust and corrosion
• Resists chipping and scratching
• For use on headers and expansion chambers
• Not for use on engines, crankcases, transmissions or radiators
• Temperature Tolerance: Withstands up to 1500 degrees F
• Finish: Flat Black
• MPN: 16-HIT

Application Instructions:

• Blast, etch or sand to expose bare metal
• Remove all loose debris
• Flush surface with non residue evaporative cleaner such as PJ1 Super Cleaner (MPN: 3-20 or 3-21 (CA compliant)
• Apply paint within 24 hours
• Shake can vigorously for a full minute. Apply 3 or 4 thin even coats. Shake can between coats. More thin coats are better than fewer thick coats.

Heat Curing On the Vehicle:

• Run at idle for 10 minutes
• Cool for 20 minutes
• Run at idle for 20 minutes
• Cool for 20 minutes

Heat Curing Off the Vehicle:

• Let paint dry completely
• Heat to 250F/121C for 30 minutes
• Cool for 30 minutes.
• Heat to 400F/204C for 30 minutes
• Cool for 30 minutes
• Heat to 650F/343C for 30 minutes

 Air Restricted     State Restrictions: AK, HI and PR    Canada Restricted   Hazardous