Permatex Professional Strength Rearview Mirror Adhesive

Permatex Professional Strength Rearview Mirror Adhesive permanently remounts mirrors to windshields.

• Rearview Mirror Adhesive
• Permanently re-mounts mirrors to windshields
• Approved and used by GM, Ford and Chrysler
• 2 Part Kit

Specifications

Automobile
Suggested Applications: Mounting rearview mirrors to windshields.

Instructions

• Remove mounting button from mirror bracket.
• Mark outside of windshield with crayon to identify old location of mirror button.
• Thoroughly scrape windshield glass and button to remove all old adhesive.
• Open Cleaner/Activator Towelette by pulling both sides of protective packet at the point at top of package. Fold packet back to use. Towelette is attached to packet.
• Clean marked area on inside of windshield with Cleaner/Activator Towelette. Allow to dry for 2 minutes or until completely dry. DO NOT TOUCH windshield after priming.
• Tear open adhesive pouch at the top. Apply one drop to the center of the button.
• Immediately apply the button to the windshield, ensuring that the correct side is facing up, and hold firmly in place for 1 minute. Allow to set for 15 minutes. Mount mirror to button. If button is mounted incorrectly, bond another button over the original one.
• Solvents, heat and leverage are not recommended for removal.
• Repair at temperatures between 50°-75°F (10°-24°C).
• Not recommended for plastic buttons.