Lithium Pros 1008 16V 15A Lithium-Ion Racing Battery Charger

16-Volt Battery Charger, 14-Amp Charge Rate

Battery Charger - Lithium-ion IntelliCharger - 16V - 14 amps - Digital LCD Display - Each - Brand: Lithium Pros - Part Number: 1008

1008 16V 15A Lithium Ion Racing Battery Charger is purpose built for  Lithium Pros 16V Lithium Ion Racing batteries.  It is a light weight,  high frequency type charger for rapid charging 16V batteries made  with Lithium Iron Phosphate cells..  The 15A of output typically  recharges Lithium Pros 16V Lithium Ion Racing batteries in 15 minutes or  less after a typical 1/4 mile drag racing pass.  (Actual recharge time varies by specific application and energy consumed.)   High frequency chargers like the 1008 16V 15A Lithium Ion Racing  Battery Charger offer very consistent and smooth output voltage  extending the life of your battery.

It is 3 lbs and connects to the battery with alligator clips.  These can  be removed and quick disconnects of the racer’s choice can be  installed.  (Please insure any connectors are tightly crimped and  soldered onto the output wires from the charger.  Carefully observe  polarity.)

The 1008 16V 15A Lithium Ion Racing Battery Charger is fully automatic  and fan cooled.  Two LEDs show the simple status of the charger.  The  first status LED is red when input power is present.  The second status  LED is orange while charging and green when charging is complete and  charging has stopped.  In addition, the LCD display will read “End” when  the charge cycle completes in a normal manner.  “End” in LCD display  tells you that the battery reached normal “fully charged” voltage and  that the current acceptance rate dropped to less than 900mA in a normal  amount of time.

It features an LCD display with a wealth of battery status information.   Battery voltage, charging amperage, State of Charge, Amp-hours charged,  time on the charger, and more can all be viewed from the LCD display.

This 1008 16V 15A Lithium Ion Racing Battery Charger is universal  voltage meaning that it accepts anything from 110VAC~240VAC @ 50~60Hz.  (USA power cords included.)  It is fused protected with a 6.3A 5mm x 20mm fuse installed.

Specifications