ARC Lighting LED Load Resistor Harness accomplishes the same task as the common gold resistor but are easier to install, have a lower profile and run 50% cooler (250°F MAX).
Generic resistors (gold aluminum resistors) generally heat to unsafe +430°F temperatures! Our LED load resistors only reach half the temperatures of common gold resistors. Aside from being safer to use, our resistors are weather tight and completely sealed from the elements. 18” of wiring makes finding an installation location simple.
At the end of the wiring, you’ll find wire splice tap connectors that will allow you to easily tap into your OEM wiring; no cutting necessary.
Adds resistance “load” to the specific location. Simulates standard halogen environment. Can assist to help a bulb stop “hyper-flashing”.
6 ohm resistors are ideal if you want to use one (1) resistor for two (2) bulbs (one for the front and one for the back). Easy to install. Clips into the existing wiring with scotch locks.
- LED Light Wire Harness
- Load Resistor
- ARC LED Lighting
- Current Draw: 1.9A @ 12V or 2.25A @ 14.4V
- Load: One (1) standard filament bulb (equivalent wattage: 25W)
- Sold as each
- MPN: 2001R
