We are Open for Business and Shipping Daily!

Arai GP-7 Helmet - SA2020 - White
Arai GP-7 Helmet - SA2020 - Frost Black
Arai GP-7 Helmet - SA2020 and FIA - White Large

Arai GP-7 Helmet - SA2020 and FIA 8859-2015

ARI685311183828 (Not in stock)

Regular price $949.95 Sale

The new Arai GP-7 features Arai’s proprietary, groundbreaking PBCL (Peripherally Belted Complex Laminate) shell construction.  This helmet has an ultra-comfortable interior, along with some new Arai technological solutions. 

The Arai GP-7 delivers an extensive list of new features including; a new re-positioned lower shield pivot point that increases the protective area of the helmet, new restyled air intake ports for optimum efficiency, two additional exhaust ports on the top of the helmet for improved exhaust airflow, a new chin bar design, new cheek pads that encapsulate your head for an amazing compact feel, and an updated rear exhaust cowling for improved aerodynamics and better exhaust air venting. The proven Arai shell gives the Arai GP-7 incredible strength and flexibility, and that strength allows Arai to use an extremely soft EPS liner that’s so comfortable it’ll make you think more about a nap than a race. Right until you strap in, that is.

Now Snell SA2020 certified, with the M6 washer/nut installed at the factory. With the 6mm washer/nut installed, anyone can now easily install a variety of Head and Neck Restraint systems that use a 6mm bolt to their helmet. This helmet also comes with the FIA 8859-2015 certification sticker applied to the interior liner of the helmet.

  • New re-positioned lower shield pivot point increases the protective area of the helmet
  • Re-styled air intake ports
  • Two additional exhaust ports on the top of the helmet for improved airflow
  • New Chin Bar design
  • Updated rear exhaust cowling for improved aerodynamics and better exhaust air venting
  • Soft EPS liner
  • Snell SA2020 and FIA 8859-2015 certified

GP-7 Fit
Simply put, it’s hard to imagine a better racing helmet. Combine Arai’s proprietary, groundbreaking PBcLc (Peripherally Belted Complex Laminate) shell construction -- the same shell shape as the F-1-grid’s GP-7SRC model; more enhanced sculpting of the cheek pads; new ventilation; and on and on – and you get the striking new Arai GP-7. The new shell gives you incredible strength and flexibility, and that strength allows Arai to use an extremely soft EPS liner that’s so comfortable it’ll make you think more about a nap than a race. Right until you strap in, that is. The cheek pads are replaceable for a more personal fit. Up top, the ventilation system is greatly improved with three larger, closeable intake vents, plus four larger exhaust cowls.

Positive Shield Latch
The positive latch mechanism provides solid shield latching, while allowing normal operation of the shield. It is designed to be an integral component of the shield system and function, not just an add-on afterthought. The simplicity of the function masks the complexity of the design.

New Shield Pivot Hardware
New shield pivot hardware, with new 1-piece track slider and screw hardware that is adjusted with a T-20 torx screw. This allows the pivot point of the shield opening to move downwards on the shell to give the shell more area.

New FCS Cheek Pads
For the GP-7SRC the cheek pads are sculpted to grip the lower jaw of the driver more securely. This feature was highlighted by our F1 drivers as they feel the helmet encapsulates their head better and also reduces outside wind noise.

Ventilation
Three large, closeable, intake vents combined with larger 10mm holes and two additional exhaust vents in the center of the helmet greatly increase air flow. While a redesigned exhaust cowling improves aerodynamics and hot air escaping the helmet. Note: The GP-7SRC comes with all vents unattached so you can customize the vent configuration depending on your specifics needs.

M6 Anchor Type
Integrated seats to accommodate a variety of Head and Neck Restraint devices. Pre-Installed M6 threaded washer/nut, with 6mm threads, to accept a variety of anchors systems for variety of Head and Neck Restraint devices and make installation much easier for people not familiar with such installations. Flat surface area around the mounting nut to allow the anchor post base to rest flush with the helmet surface around the entire perimeter of the anchor base. The GP-7SRC come standard with the HANS Clips installed.

Eject Ready Crown Pad
Pre-cut pocket, under crown pad, can be easily removed to accommodate optional E-Ject(R) system.

Drink System Compatible
For the GP-7 the chin liner is now more easily removed to install a drink tube into the chin liner. The chin liner comes standard with 4 different drink hose placements.

    Attributes

    Product Line
    GP-7
    Open/Closed Face
    Closed
    Fresh Air
    No
    Vent System
    Yes
    Snell Rating
    SA 2020
    FIA Approved
    Yes
    Head and Neck Support Ready
    Yes
    Shield Included
    Yes
    Shield Color
    Clear
    Visor Included
    No
    Graphics
    No
    Bag Included
    Yes
    Gloss/Flat
    Gloss White or Flat Black
    Material
    Fiberglass
    Color
    White or Frost Black
    Finish
    Paint
    Quantity
    Each

    Sizes and Colors

    • 685311183828 (Small, Gloss White)
    • 685311183835 (Medium, Gloss White)
    • 685311183842 (Large, Gloss White)
    • 685311183866 (Small, Frost Black)
    • 685311183873 (Medium, Frost Black)
    • 685311183880 (Large, Frost Black)

    Size Chart

    Determine your helmet size by measuring your head at a point 1'' above your eyebrow and a point in the back of the head that results in the largest possible measurement.

    Helmet Size Inches Metric
    2XS
    6-3/4" to 6-7/8" 21-1/4 to 21-5/8 54 to 55
    XS 7" 22 56
    Small 7-1/8" 22-3/8 57
    Medium 7-1/4" to 7-3/8" 22-3/4 to 23-1/4 58 to 59
    Large 7-1/2" 23-5/8 60
    XL 7-5/8" to 7-3/4" 24 to 24-3/8 61 to 62
    2XL
    7-7/8" to 8" 24-3/4 to 25-1/4 63 to 64
    3XL 8-1/8" to 8-1/4" 25-5/8 to 26 65 to 66
    4XL 8-3/8" to 8-1/2" 26-3/8 to 26-3/4 67 to 68