POR-15 OEM Bed LinerPOR49704 (45 in stock)
Truck Bed and Underbody Coating
POR-15 OEM Bed Liner truck bed and underbody coating offers superior adhesion, impact resistance, and flexibility, as well as an attractive texturized gloss black finish that provides the ultimate in rubberized truck bed and undercoating protection. POR-15 OEM Bed Liner is UV stable and will resist damage typically caused by exposure to UV. POR-15 OEM Bed Liner is a low-odor product that can be cleaned with soap and water and does not have a limiting pot life. POR-15 OEM Bed Liner also has good sound dampening qualities, making it a good choice for soundproofing. Any unused product can be resealed in its container and used later for touch-up or on other projects. For the ultimate in protection apply over POR-15 Rust Preventive Coating.
One gallon of POR-15 OEM Bed Liner will cover approximately 100-120 square feet. This is enough coating to properly apply the recommended 2-coats to all standard-sized 6 foot truck beds.
- Superior adhesion
- Impact resistance
- Texturized gloss black finish
- UV stable
- One gallon covers approximately 100-120 square feet
- One gallon is enough for 2 coats to standard-sized 6 ft truck beds
- Professional Use
- MPN: 49704 (quart) and 49701 (gallon)
- Metal truck beds
- Rocker panels
- Boat docks
- Tractor beds
- Tool boxes
- Running boards
- Work van floors
Air Restricted State Restrictions: AK, HI and PR
Surface Preparation: Proper surface preparation is essential to achieve a high quality finish. Read the SDS sheet and wear proper protection, which may include gloves, eye protection, and/or other protective devices.
Previously Finished or Primed Surfaces: Using POR-15 Cleaner Degreaser ensures that the surface is clean, dry, and free from oil, grease, dirt, salts, and any other contaminants. All blistered and loose paint must be removed. All bare areas must be primed with POR-15 Rust Preventive Coating before a full coat is applied. Glossy surfaces should be roughened before re-coating.
Bare Steel: Using POR-15 Cleaner Degreaser clean all surfaces to ensure they are free of loose rust, mill scale and contaminants such as oil, grease, dirt, and salts. You must use POR-15 Metal Prep if you are painting on new steel, galvanized metal, aluminum, or any smooth metal surface.
Application Information: REMEMBER TO STIR THIS PRODUCT BEFORE AND DURING USE. A gallon of POR-15 OEM Bed Liner will cover approximately 100-120 square feet. This is enough coating to properly apply the recommended 2-coats to all standard-sized 6 foot truck beds. Apply when air, surface and product temperatures are above 50°F (10°C) and surface temperature is at least 5°F (3°C) above the dew point*. Avoid exterior application late in the day when dew and condensation are likely to form or if rain is expected. *Air and surface temperatures must remain above 50ºF (10ºC) for the next 24 hours. PROTECT FROM FREEZING. Once applied POR-15 OEM Bed Liner will be ready for light-duty use in 24 hours and regular use in 48 hours.
Application Equipment: Brush Use a high quality nylon brush. Roller Use all-purpose short nap shed resistant phenolic core roller.
Clean Up Instructions: Clean hands and all tools using soap and water before POR-15 OEM Bed Liner has dried. Make sure the container lid is securely sealed back on to container. Unused POR-15 OEM Bed Liner can be used at any time.
California Residents: Proposition 65 warning