POR-15 Matte Clear Coat premium quality 2-part coating seals in any color or patina for a custom low sheen look with amazing results. POR-15 Matte Clear Coat is specifically designed to deliver an extreme level of resistance to scuffing and burnishing, and be a leader in waterborne and even traditional matte clear coatings. POR-15 Matte Clear Coat is formulated with a low VOC, Waterborne Polyurethane Clear Coat technology that achieves a low sheen through chemistry and is silica-free. POR-15 Matte Clear Coat has excellent weathering properties and can be used on any substrate that can be cleared with a traditional clear coat.
Low Sheen Protective Clear Coat
Waterborne Polyurethane Clearcoat Technology
Can be hand washed with mild detergent and dried with a microfiber cloth
Stir Matte Clear Coat before mixing. 2.4:1 Mixing ratio 2.4 parts Matte Clear 1 Part Hardener Stir well (do not shake)
CONVENTIONAL - Suggested SPRAY GUN SET UP 1.2 - 1.4 Fluid tip 4 - 8 inch Spray distance 20 - 45 psi Air pressure at regulator 8 - 11 psi at cap Apply with a 60% overlap 2 full wet coats.
1. Prepare your base as you would most other substrates. 2. Apply 2 full coats or until desired coverage has been achieved. 3. Allow to flash off properly between coats. 4. Allow 15 minutes before baking for 30 minutes @ 90 °F.