POR-15 Detail Paint - Aerosol

Replicate the original look of metals on cast parts with POR-15 Detail Paint!

POR-15 Detail Paint provides a professional grade finish that reproduces the original look of cast parts. POR-15 Detail Paint is designed to have a low sheen, will not yellow and will keep your restored component looking factory new. POR-15 Detail Paint is formulated to provide maximum corrosion resistance and protect metal substrates against weather, sunlight, oil and water.

Applications: master cylinder, steering box, transmission housings, hood springs, driveshaft, suspension components etc.

• Fast Drying for Quick & Easy Handling
• Replicates the Look of Various Metals
• Resists Corrosion & Abrasion
• Professional Use
• MPN:  41618 (Aluminum), 41718 (Cast Iron Gray)

 Air Restricted      State Restrictions: AK, HI and PR   

Instructions

Surface must be clean, dry and free of oil and other contaminants before painting. Use POR-15 Cleaner Degreaser to clean metal. Protect surrounding areas from spray mist. If being used to topcoat POR-15 Rust Preventive Coating, spray while POR-15 Rust Preventive Coating is dry to the touch with slight finger drag, normally 2 – 6 hours. If POR-15 Rust Preventive Coating has dried, wait 24 hours then lightly sand or scuff surface with pad or 320 sand paper. If scuffing or sanding is not desired, use POR-15 Self Etching Primer over cured POR-15 Rust Preventive Coating without sanding, then topcoat over the primer with POR-15 Detail Paint. 

• Shake can at least one minute before and occasionally during use.
• Spray surface with steady, even strokes at a distance of 8 to 10 inches. Several light coats give a better finish than one heavy coat. For best results, recoat within 1 hour or after 24.

Cleanup: To prevent clogs in spray nozzle, hold can upside down and spray until clear gas appears. Completely empty cans may be recycled or disposed of with regular trash. Dispose of partially empty cans responsibly. DO NOT puncture, incinerate or compact.