Bell Sport HelmetBEL1424001 (2 in stock)
Combining classic Bell styling, comfortable interior, and lightweight composite shell, the Bell Sport Helmet is designed for Sportsman or entry level racers who demand quality and value. Sport Helmets offer full face protection with standard eyeport and accept a 281 SRV shield. Each helmet comes with a clear shield and Bell visor strip as standard equipment. Helmets are pre-drilled to accommodate head and neck restraints, and you can customize the fit using Bell Cheek Pad Inserts in 5, 10, 15, and 20 mm sizes.
- All-purpose helmet
- Snell SA2015 certification
- Lightweight composite shell
- Superior ventilation
- Standard sized eyeport
- E-Max multidensity liner
- Accepts a 281 SRV 3mm shield (SRV-2 pivot system)
- Clear shield included
- Provision to attach M6 hardware built in to helmet
Bell Helmet Size Chart
|Standard Size||Hat Size||Inches||Centimeters|
|4XS||6 3/8||20 1/16||51|
|3XS||6 1/2 - 6 5/8||20 1/2 - 20 7/8||52-53|
|2XS||6 3/4 - 6 7/8||21 1/2 - 21 5/8||54-55|
|S||7 1/8||22 3/8||57|
|M||7 1/4 - 7 3/8||22 3/4 - 23 1/4||58-59|
|L||7 1/2||23 5/8||60|
|XL||7 5/8 - 7 3/4||24 - 24 3/8||61-62|
|2XL||7 7/8 - 8||24 3/4 - 25 1/4||63-64|
|3XL||8 1/8 - 8 1/4||25 5/8 - 26||65-66|
|4XL||8 3/8 - 8 1/2||26 3/8 - 26 3/4||67-68|
Fitting your Bell Helmet
Proper helmet fit is vital to the performance of a helmet during an impact. For maximum protection the helmet must fit properly with the chin strap securely fastened and provide adequate peripheral vision.
Measuring the head is only a starting point for the entire sizing procedure. Due to varying shapes, heads that are apparently the same size when measured by a tape may not necessarily fit the same size helmet. A small metal tape measure or a cloth tape may be used to make your initial measurement. You can also use a string, which can then be laid against a measuring tape.
The circumference of the head should be measured at a point approximately one inch above the eyebrows in front, and at a point in the back of the head that results in the largest possible measurement. Take several measurements. The largest measurement is the one you want to try on first. If you use a balaclava or head sock, always measure and fit the helmet with it on. Use the Bell sizing chart to determine the size that best matches the head measurement.