Bell M8 Helmet - SA2015BEL1419003 (3 in stock)
The Bell M.8 Helmet incorporates traditional styling with enhanced visibility making the helmet a good choice for all forms of racing. The M.8 is made from a lightweight composite shell. It has superior ventilation with maual lever air intake vents and a large eyeport. The M.8 is a great choice for racers who want a lightweight, multi-purpose helmet with a wider field of vision (especially for those who wear eye glasses) and updated Bell styling and performance.
- Lightweight composite shell
- High-pressure molding system for improved shell strength
- Multi-piece, multi-density high-impact custom bead absorbing liner for low and high velocity impact protection
- Integrated channels in the face piece offer multiple options to install integrated drinking tube systems and radio microphone systems
- Black Comfort-Plus flame retardant interior fabric
- Multi foam density standard interior
- Superior ventilation system includes direct flow chin bar vents and manual level air intake vents
- Hollow synthetic rubber gasket seal ensuring that air, water and dirt cannot enter the helmet
- Large size eyeport
- SRV-8 3mm SRV Shield (SRV-1 Pivot System) - Clear Shield
- Provision to attach M6 hardware built in to helmet
- Draw string helmet bag included
- Hex wrench included
- Available in White or Matte Black
- Snell SA2015 Homologation
Bell Helmet Size Chart
|Standard Size||Hat Size||Inches||Centimeters|
|4XS||6 3/8||20 1/16||51|
|3XS||6 1/2 - 6 5/8||20 1/2 - 20 7/8||52-53|
|2XS||6 3/4 - 6 7/8||21 1/2 - 21 5/8||54-55|
|S||7 1/8||22 3/8||57|
|M||7 1/4 - 7 3/8||22 3/4 - 23 1/4||58-59|
|L||7 1/2||23 5/8||60|
|XL||7 5/8 - 7 3/4||24 - 24 3/8||61-62|
|2XL||7 7/8 - 8||24 3/4 - 25 1/4||63-64|
|3XL||8 1/8 - 8 1/4||25 5/8 - 26||65-66|
|4XL||8 3/8 - 8 1/2||26 3/8 - 26 3/4||67-68|
Fitting your Bell Helmet
Proper helmet fit is vital to the performance of a helmet during an impact. For maximum protection the helmet must fit properly with the chin strap securely fastened and provide adequate peripheral vision.
Measuring the head is only a starting point for the entire sizing procedure. Due to varying shapes, heads that are apparently the same size when measured by a tape may not necessarily fit the same size helmet. A small metal tape measure or a cloth tape may be used to make your initial measurement. You can also use a string, which can then be laid against a measuring tape.
The circumference of the head should be measured at a point approximately one inch above the eyebrows in front, and at a point in the back of the head that results in the largest possible measurement. Take several measurements. The largest measurement is the one you want to try on first. If you use a balaclava or head sock, always measure and fit the helmet with it on. Use the Bell sizing chart to determine the size that best matches the head measurement.