Bell Dominator.2 HelmetBEL1312001 (1 in stock)
The legendary Dominator is the most innovative, popular and successful open wheel helmet that Bell has ever produced. The Dominator.2 is the next evolution in compact, lightweight aerodynamic helmet design and performance. This helmet is designed for open wheel, dirt track and kart racers who demand aerodynamic stability, outstanding comfort and fit plus superior ventilation.
- Lightweight carbon composite shell
- Built-in aero gurneys for stability and performance in high speed conditions
- Ultra plush Comfort-Max fire retardant interior fabric with moisture wicking properties
- Pro-style multi Foam density interior with contoured cheek pads for professional fit with extra firm neck collar support
- Multi-piece, multi-density high impact, custom bead absorbing liner for low and high velocity impact protection
- Positive visor seal prevents dust from entering the eyeport
- Full ventilation (chin bar, forehead, top vents)
- Standard size eyeport
- 287 3mm SRV Shield (SRV-1 pivot system) – Clear Shield
- M6 terminal hardware for Head & Neck Restraints
- Helmet gag and hex wrench included
- Snell SA2015 homologation
Bell Helmet Size Chart
|Standard Size||Hat Size||Inches||Centimeters|
|4XS||6 3/8||20 1/16||51|
|3XS||6 1/2 - 6 5/8||20 1/2 - 20 7/8||52-53|
|2XS||6 3/4 - 6 7/8||21 1/2 - 21 5/8||54-55|
|S||7 1/8||22 3/8||57|
|M||7 1/4 - 7 3/8||22 3/4 - 23 1/4||58-59|
|L||7 1/2||23 5/8||60|
|XL||7 5/8 - 7 3/4||24 - 24 3/8||61-62|
|2XL||7 7/8 - 8||24 3/4 - 25 1/4||63-64|
|3XL||8 1/8 - 8 1/4||25 5/8 - 26||65-66|
|4XL||8 3/8 - 8 1/2||26 3/8 - 26 3/4||67-68|
Fitting your Bell Helmet
Proper helmet fit is vital to the performance of a helmet during an impact. For maximum protection the helmet must fit properly with the chin strap securely fastened and provide adequate peripheral vision.
Measuring the head is only a starting point for the entire sizing procedure. Due to varying shapes, heads that are apparently the same size when measured by a tape may not necessarily fit the same size helmet. A small metal tape measure or a cloth tape may be used to make your initial measurement. You can also use a string, which can then be laid against a measuring tape.
The circumference of the head should be measured at a point approximately one inch above the eyebrows in front, and at a point in the back of the head that results in the largest possible measurement. Take several measurements. The largest measurement is the one you want to try on first. If you use a balaclava or head sock, always measure and fit the helmet with it on. Use the Bell sizing chart to determine the size that best matches the head measurement.