Permatex High Temperature Sleeve Retainer is an anaerobic adhesive that secures slip and press fit assemblies.
- Thread Locker
- OEM specified
- High Temperature Sleeve Retainer
- High temperature, up to 400ºF (204ºC)
- Adds up to 3,000 PSI holding power
- Restores fit to worn or out-of-tolerance assemblies
- Prevents surface corrosion
- Conforms to ASTM D5363 AN0411 (Mil-R-46082, Type II)
- MPN: 64000 (6 ml tube) and 64060 (36 ml bottle)
Application
Note: Sleeve Retainer works on metal parts. It is not recommended for plastics. To disassemble parts, weaken cured Sleeve Retainer by heating above 500°F (260°C); then use presses or pullers to separate components.
Automobile
Suggested Applications: Cylinder sleeves, valve guides, valve seats, bearings and bushings, woodruff keys, and liner assemblies
Motorcycle
Suggested Applications: Valve guides
Heavy Duty
Suggested Applications: Retaining bushings, cup plugs, gears, dowel pins, oil seals, ring gear bolts, differential lock pinswheel bearins, idler shafts, press fit bearings
Instructions
- Clean and dry parts using Permatex® Surface Prep™ activator.
- Apply Sleeve Retainer to both parts and assemble with a turning motion.
- Parts fixture within 1 hour and are fully cured after 24 hours.
- Refer to the Technical Data Sheet for complete information.
