RaceQuip PRO20 Side Air Helmet - SA2020

The RaceQuip PRO20 Side Air is a Snell SA2020 rated auto racing helmet.  It is the same helmet as the PRO20 with the addition of built-in side air.  This helmet is also referred to as forced air, blower, or pumper helmets because it has a provision on the helmet to attach a fresh air hose.

The shell is built using pre-preg composite materials placed into pressurized steel molds to achieve the best combination of light weight and strength. Reinforced M6 threaded HANS/HNR inserts are mated to the shell along with an expanded polystyrene (EPS) liner. HANS or other Head and Neck Restraint device anchor posts (not included) can be easily attached to the outside of the helmet using the installed M6 threaded inserts.

Forced air is plumbed into the left side of the helmet through a standard 1.250" barbed fitting so air flows across the shield from left to right for cooling and anti-fogging. The distortion free 3mm polycarbonate shield features a red anodized aluminum pivot kit, hand ratcheting TearOff posts, and a silicone eyeport gasket to seal out dust and dirt. A wide eyeport provides good peripheral vision and allows the use of personal eyewear. The Snell SA rating means that the Nomex® interior and paint are fire retardant as well as the kevlar chin strap, so the RaceQuip PRO20 Side Air Helmet is suitable for use in all forms of motorsports. The comfort fit blended Nomex® interior along with exhaust vents on the top and back of the shell help keep your scalp cool. All these features are wrapped in a stylish aero design FRP Composite shell with a medium sized chin spoiler. 

• Pro20 Side Air Helmet
• Forced air is plumbed into the left side
• FRP Composite shell
• Stylish aero design
• Exhaust vents on top and back of the shell
• Nomex interior
• Distortion free 3mm polycarbonate shield
• Silicone eyeport gasket seals out dust and dirt
• Wide eyeport 
• Kevlar chin strap
• Snell SA2020
• Color: Flat Black

Specifications

Size Chart

* Youth SFI Helmets have a smaller, lighter shell and are designed for lower speed youth racing.

Measuring Fit:

Measure with a cloth tape around the head about 1" above eyebrows. A snug fit is optimum. Use size in CM for best accuracy and go with the largest measurement you get. Hat sizes are only a guideline and not the most accurate. Inches are rounded to nearest 1/16. If you are between sizes you must go with the larger size. Add 1 to 1.5cm for a head sock.

When fitting a helmet, be sure to tighten chin strap before evaluating fit.

Sizes:

The RaceQuip PRO20 Side Air Helmet is available in the following sizes:

• 926992 (Small)
• 926993 (Medium)
• 296995 (Large)
• 296996 (XL)
• 296997 (2XL)