Bell M8 Helmet - SA2020
BEL1419A12 (1 in stock)Bell Helmets
Regular price
€557,95
The M8 is the next evolution in Bell’s legendary M series design, incorporating traditional Bell styling, a huge eyeport for enhanced visibility, and unrivaled versatility. The M8 provides outstanding comfort, performance features, and value. The lightweight composite shell, superior ventilation, and extended size range make the M8 a great choice for racers of all types who want a multi-purpose helmet with a wider field of vision (especially for those who wear glasses) that can be used in all forms of motorsports.
- Lightweight composite shell
- Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance
- Versatile ventilation system direct flow front chin bar ventilation and upper manual lever air intake vents that can be opened and closed
- Integrated channels in face piece offer multiple options to install drink tube and radio communication systems
- M6 terminals for FHR anchor attachment and homologated for use with approved head and neck devices
- Largest size range available in the Bell Racing product line
- Large eyeport for enhanced vision
- Synthetic rubber gasket seal to prevent dirt and water from entering the helmet
- Shield and pivot kit: SRV-8, SRV-1
- Uses SRV-8 shields
- Homologation: Snell SA2020
- Colors: White and Matte Black
- Sizes: XXS, XS, S, M, L, XL, 2XL, 3XL, 4XL
Attributes
|
Product Line
|
M.8 Racer
|
|
Fresh Air
|
No
|
|
Vent System
|
Yes
|
|
Snell Rating
|
SA 2020
|
|
Head and Neck Support Ready
|
Yes
|
|
Shield Included
|
Yes
|
|
Shield Color
|
Clear
|
|
Visor Included
|
No
|
|
Graphics
|
No
|
|
Bag Included
|
Yes
|
|
Material
|
Carbon Composite
|
|
Color
|
Gloss White or Flat Black
|
|
Finish
|
Paint
|
| Quantity | Each |
Sizes and Colors Available:
| MPN | Size | Color |
| 1419A03 | Small | Gloss White |
| 1419A04 | Medium | Gloss White |
| 1419A05 | Large | Gloss White |
| 1419A06 | XL | Gloss White |
| 1419A07 | 2XL | Gloss White |
| 1419A08 | 3XL | Gloss White |
| 1419A09 | 4XL | Gloss White |
| 1419A12 | XS | Flat Black |
| 1419A13 | Small | Flat Black |
| 1419A14 | Medium | Flat Black |
| 1419A15 | Large | Flat Black |
| 1419A16 | XL | Flat Black |
| 1419A17 | 2XL | Flat Black |
| 1419A18 | 3XL | Flat Black |
| 1419A19 | 4XL | Flat Black |
Size Chart
Bell Size Chart
| Size | Hat Size | Inches | Centimeters |
|---|---|---|---|
| 4XS | 6 3/8 | 20 1/16 | 51 |
| 3XS | 6 1/2 - 6 5/8 | 20 1/2 - 20 7/8 | 52-53 |
| 2XS | 6 3/4 - 6 7/8 | 21 1/2 - 21 5/8 | 54-55 |
| XS | 7 | 22 | 56 |
| S | 7 1/8 | 22 3/8 | 57 |
| M | 7 1/4 - 7 3/8 | 22 3/4 - 23 1/4 | 58-59 |
| L | 7 1/2 | 23 5/8 | 60 |
| XL | 7 5/8 - 7 3/4 | 24 - 24 3/8 | 61-62 |
| 2XL | 7 7/8 - 8 | 24 3/4 - 25 1/4 | 63-64 |
| 3XL | 8 1/8 - 8 1/4 | 25 5/8 - 26 | 65-66 |
| 4XL | 8 3/8 - 8 1/2 | 26 3/8 - 26 3/4 | 67-68 |
Fitting your Bell Helmet
Proper helmet fit is vital to the performance of a helmet during an impact. For maximum protection the helmet must fit properly with the chin strap securely fastened and provide adequate peripheral vision.
Measuring the head is only a starting point for the entire sizing procedure. Due to varying shapes, heads that are apparently the same size when measured by a tape may not necessarily fit the same size helmet. A small metal tape measure or a cloth tape may be used to make your initial measurement. You can also use a string, which can then be laid against a measuring tape.
The circumference of the head should be measured at a point approximately one inch above the eyebrows in front, and at a point in the back of the head that results in the largest possible measurement. Take several measurements. The largest measurement is the one you want to try on first. If you use a balaclava or head sock, always measure and fit the helmet with it on. Use the Bell sizing chart to determine the size that best matches the head measurement.