Bell GP3 Sport Helmet - SA2020
BEL1417A22 (1 in stock)Bell Helmets
Regular price
€709,95
Bell's GP3 Sport combines traditional F1 styling with a lightweight carbon composite shell to create a high performing helmet for open wheel, formula racers and karters. Leading edge aerodynamic performance features excellent ventilation and a dual-screen anti-fog (DSAF) shield for clear vision in all condition.
- Lightweight composite shell
- Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance
- Optical grade injection molded Double Screen Anti-Fog (DSAF) visor for anti-fog control and superior visibility
- Versatile ventilation system featuring lower front chin bar ventilation and upper manual lever air intake vents that can be opened and closed
- Front duckbill (chin spoiler) for improved aerodynamic performance and compatible with Bell’s rear spoilers, top gurney, and chin bar gurneys (available separately) for enhanced stability at high speeds
- Integrated channels in face piece offer multiple options to install drink tube and radio system
- M6 terminals for FHR anchor attachment and homologated for use with approved head and neck devices
- Synthetic rubber gasket seal to prevent dirt and water from entering the helmet
- Shield and pivot kit: SE03, SV(SE03/SE05)
- Snell SA2020 certified
Attributes
|
Product Line
|
GP3 Sport
|
|
Open/Closed Face
|
Closed
|
|
Fresh Air
|
No
|
|
Vent System
|
Yes
|
|
Snell Rating
|
SA 2020
|
|
FIA Approved
|
Yes
|
|
Head and Neck Support Ready
|
Yes
|
|
Shield Included
|
Yes
|
|
Shield Color
|
Clear
|
|
Visor Included
|
No
|
|
Wicker Bill Included
|
Yes
|
|
Graphics
|
No
|
|
Bag Included
|
Yes
|
|
Material
|
Carbon Composite
|
|
Color
|
Gloss White or Flat Black
|
|
Finish
|
Paint
|
|
Quantity
|
Each
|
Available Sizes/Colors
| MPN | Size | Color |
| 1417A21 | Small | Gloss White |
| 1417A22 | Medium | Gloss White |
| 1417A23 | Large | Gloss White |
| 1417A24 | XL | Gloss White |
| 1417A51 | Small | Flat Black |
| 1417A52 | Medium | Flat Black |
| 1417A53 | Large | Flat Black |
| 1417A54 | XL | Flat Black |
Size Chart
Bell Helmet Size Chart
| Standard Size | Hat Size | Inches | Centimeters |
|---|---|---|---|
| 4XS | 6 3/8 | 20 1/16 | 51 |
| 3XS | 6 1/2 - 6 5/8 | 20 1/2 - 20 7/8 | 52-53 |
| 2XS | 6 3/4 - 6 7/8 | 21 1/2 - 21 5/8 | 54-55 |
| XS | 7 | 22 | 56 |
| S | 7 1/8 | 22 3/8 | 57 |
| M | 7 1/4 - 7 3/8 | 22 3/4 - 23 1/4 | 58-59 |
| L | 7 1/2 | 23 5/8 | 60 |
| XL | 7 5/8 - 7 3/4 | 24 - 24 3/8 | 61-62 |
| 2XL | 7 7/8 - 8 | 24 3/4 - 25 1/4 | 63-64 |
| 3XL | 8 1/8 - 8 1/4 | 25 5/8 - 26 | 65-66 |
| 4XL | 8 3/8 - 8 1/2 | 26 3/8 - 26 3/4 | 67-68 |
Fitting your Bell Helmet
Proper helmet fit is vital to the performance of a helmet during an impact. For maximum protection the helmet must fit properly with the chin strap securely fastened and provide adequate peripheral vision.
Measuring the head is only a starting point for the entire sizing procedure. Due to varying shapes, heads that are apparently the same size when measured by a tape may not necessarily fit the same size helmet. A small metal tape measure or a cloth tape may be used to make your initial measurement. You can also use a string, which can then be laid against a measuring tape.
The circumference of the head should be measured at a point approximately one inch above the eyebrows in front, and at a point in the back of the head that results in the largest possible measurement. Take several measurements. The largest measurement is the one you want to try on first. If you use a balaclava or head sock, always measure and fit the helmet with it on. Use the Bell sizing chart to determine the size that best matches the head measurement.