Bell BR8 Carbon Helmet - SA2020 / FIA8859

Designed for off-road and dirt forms of racing, the versatile and ultra-lightweight BR8 Carbon can be used in multiple configurations including standard, left or right side forced air, left or right 3/4 top forced air, or top forced air. Utilizing an innovative kit system (included with the helmet), racers can customize the BR8 Carbon to adapt to different forms of racing and seat configurations providing the ultimate flexibility in one model. The BR8 Carbon features an aerodynamic front duckbill, Double Screen Anti-Fog (DSAF) insert to create a positive visor seal and prevent shield fogging, and rear-facing Venturi airflow vents that prevent dust from entering the helmet while still allowing forced air to be introduced into the helmet. The BR8 Carbon features a unique air chamber system that evenly distributes airflow around the head regardless of the top air configuration used. The helmet can be used with or without ear cups.

• Lightweight carbon shell
• Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance
• Integrated channels in face piece offer multiple options to install drink tube and radio system
• Includes front duckbill to enhance aerodynamic performance
• Comes standard with rear facing vents that create a Venturi effect allowing air to exchange and circulate in the helmet white preventing dust and dirt from entering
• Can be converted to left or right side air, 3⁄4 left or right top air, or top air by using a versatile kit system (included) with forced air nozzle and cover plates
• Forced air kits available for aftermarket including quick lock (V10) and are fully compatible with Maglock
• Can be used with or without ear cups (ear cups included)
• M6 terminals for FHR anchor attachment and homologated for use with approved head and neck devices
• Interior: Dark Grey High Strength – High Comfort FR Fabric
• Color: Carbon, Gloss Finish
• Homologation: FIA8859-2015 and Snell SA2020
• Sizes: 7 1/8- (57-) to 7 5/8+ (61+)

In The Box

• BR8 Carbon Helmet
• Clear SRV-8 DSAF Shield Installed
• Forced Air Low Profile Piece
• 5 Forced Air Cover Plates
• Ear Cup Set
• Draw String Helmet Bag
• Plastic Tear-off Post Kit
• Hex Wrench Key

Certifications

• Snell SA2020
• FIA8859

Size Chart

Bell Helmet Size Chart

Fitting your Bell Helmet

Proper helmet fit is vital to the performance of a helmet during an impact. For maximum protection the helmet must fit properly with the chin strap securely fastened and provide adequate peripheral vision.

Measuring the head is only a starting point for the entire sizing procedure. Due to varying shapes, heads that are apparently the same size when measured by a tape may not necessarily fit the same size helmet.  A small metal tape measure or a cloth tape may be used to make your initial measurement. You can also use a string, which can then be laid against a measuring tape.

The circumference of the head should be measured at a point approximately one inch above the eyebrows in front, and at a point in the back of the head that results in the largest possible measurement. Take several measurements. The largest measurement is the one you want to try on first. If you use a balaclava or head sock, always measure and fit the helmet with it on. Use the Bell sizing chart to determine the size that best matches the head measurement.

Available Sizes