Allstar Race Car Lift with Steel Frame

The Allstar Race Car Lift with Steel Frame is a portable lift that collapses to a low 3" profile and raises up to 17".  This lift is intended for use on dirt late models and modifieds weighing 2,400 pounds or less. The lift weighs only 85 pounds, and is easily positioned under the race car to simplify tire changes and chassis tuning.

This portable lift  is a complete system that includes a 110V AC 3/4 hp hydraulic pump with cord and plug.  It also includes hydraulic cylinders with down assist canisters, 1" bolt on risers for cars with raised frame rails, safety struts to lock raised lift in place, assist handle and 20' of hydraulic quick connect hose to attach the pump to the lift. The pump provides power up/gravity down operation and can be mounted either horizontally or vertically, typically mounted to trailer or a hand cart. A push-button on the motor starts the unit to raise lift. To lower, a manually operated release valve is used for finger-tip control of lowering speed.

• Allstar Race Car Lift with Steel Frame
• Intended for use on dirt late models and modifieds weighing 2,400 pounds or less
• Strong 14 gauge steel lift will support up to 2,400 pounds
• Portable lift collapses to a low 3 profile and raises up to 17"
• Easily positioned under race car to raise off the ground to simplify tire changes and chassis tuning
• Includes a 110V AC 3/4 hp hydraulic pump (ALL11280) with cord and plug, hydraulic cylinders with down assist canisters, 1" bolt on risers for cars with raised frame rails, safety struts to lock raised lift in place, assist handle and 20' of hydraulic quick connect hose
• Pump is compatible with hydraulic fluid, ATF, 10W30 or 10W40 oil (not included)
• Four quarts of fluid are required to fill system
• Assembly is required; all hardware included
• MPN: ALL11270