Bell K1 Sport Helmet - SA2020
BEL1420A42 (2 in stock)Bell Helmets
Regular price
$459.99
The K1 Sport is a race-ready, multi-use, full-feature helmet with superior ventilation combined with modern styling built for the entry-level racer who demands quality at an affordable price. Incorporating a lightweight composite shell, excellent fit, and multiple ventilation options, the all-purpose K1 Sport is a perfect choice for racers on a budget or auto enthusiasts just entering the sport.
- Lightweight composite shell
- Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance
- Superior ventilation with direct flow chin bar vents, forehead vents, and top vents
- Air Intake, rear spoiler, top gurney, and chin bar gurneys available separately
- Forced air attachments available separately for use with external cooling systems
- M6 terminals for FHR anchor attachment and homologated for use with approved head and neck devices
- Synthetic rubber gasket seal to prevent dirt and water from entering the helmet
- Shield and pivot kit: 287 SRV, SRV-1
- Homologation: Snell SA2020
- Sizes: XS, S, M, L, XL
Includes:
- K1 Sport
- Clear 287 SRV Shield Installed
- Draw String Helmet Bag
- Hex Wrench Key
Attributes
|
Product Line
|
K-1 Sport
|
|
Fresh Air
|
No
|
|
Vent System
|
Yes
|
|
Snell Rating
|
SA 2020
|
|
Head and Neck Support Ready
|
Yes
|
|
Shield Included
|
Yes
|
|
Shield Color
|
Clear
|
|
Visor Included
|
No
|
|
Graphics
|
No
|
|
Bag Included
|
Yes
|
|
Gloss/Flat
|
Gloss
|
|
Material
|
Carbon Composite
|
|
Color
|
White or Flat Black
|
|
Finish
|
Paint
|
|
Quantity
|
Each
|
Sizes and Colors Available:
| MPN | Size | Color |
| 1420A42 | XS | White |
| 1420A43 | Small | White |
| 1420A44 | Medium | White |
| 1420A45 | Large | White |
| 1420A46 | XL | White |
| 1420A52 | XS | Flat Black |
| 1420A53 | Small | Flat Black |
| 1420A54 | Medium | Flat Black |
| 1420A55 | Large | Flat Black |
| 1420A56 | XL | Flat Black |
Size Chart
Bell Helmet Size Chart
| Standard Size | Hat Size | Inches | Centimeters |
|---|---|---|---|
| 4XS | 6 3/8 | 20 1/16 | 51 |
| 3XS | 6 1/2 - 6 5/8 | 20 1/2 - 20 7/8 | 52-53 |
| 2XS | 6 3/4 - 6 7/8 | 21 1/2 - 21 5/8 | 54-55 |
| XS | 7 | 22 | 56 |
| S | 7 1/8 | 22 3/8 | 57 |
| M | 7 1/4 - 7 3/8 | 22 3/4 - 23 1/4 | 58-59 |
| L | 7 1/2 | 23 5/8 | 60 |
| XL | 7 5/8 - 7 3/4 | 24 - 24 3/8 | 61-62 |
| 2XL | 7 7/8 - 8 | 24 3/4 - 25 1/4 | 63-64 |
| 3XL | 8 1/8 - 8 1/4 | 25 5/8 - 26 | 65-66 |
| 4XL | 8 3/8 - 8 1/2 | 26 3/8 - 26 3/4 | 67-68 |
Fitting your Bell Helmet
Proper helmet fit is vital to the performance of a helmet during an impact. For maximum protection the helmet must fit properly with the chin strap securely fastened and provide adequate peripheral vision.
Measuring the head is only a starting point for the entire sizing procedure. Due to varying shapes, heads that are apparently the same size when measured by a tape may not necessarily fit the same size helmet. A small metal tape measure or a cloth tape may be used to make your initial measurement. You can also use a string, which can then be laid against a measuring tape.
The circumference of the head should be measured at a point approximately one inch above the eyebrows in front, and at a point in the back of the head that results in the largest possible measurement. Take several measurements. The largest measurement is the one you want to try on first. If you use a balaclava or head sock, always measure and fit the helmet with it on. Use the Bell sizing chart to determine the size that best matches the head measurement.